Sale!

Relay Harness Spdt 5-PIN Set w/Socket Holder Interlocking Block 12 Gauge pigtails Wire Harness Connector

$8.99 $8.09

High quality composite housings that can protect against harsh temperatures and under hood conditions
Relay socket with 5 wires: Black / Ground, Blue / VDC, White / Trigger, Red / Output N/C,Yellow / Output N/O
Silver based Contactor with 24VDC, 40 Amp 5-Prong SPDT Relay for All auto-devices.
Safety UL Flame retardant 9″ wires for the main contact.
Package include: 12 relays + 12 relay sockets with wires.

SKU: TFM-J-RlayHrness-6PCS/12AWG-GEN Category:

Description

!!!Plz Note: Installer of this product must have a good understanding of automotive electronics,systems, and procedures.

The user/installer of this product assumes full responsibility in determining the proper mounting location while prioritizing the safety of all passengers in the vehicle.
For your and others’ safety,let professional technicians to install the equipment.

Specifications:
NO 40A 24VDC
NC 30A 24VDC
Max Operating Current: 40A
Coil Voltage: 24V DC
Coil Current: 154 mA
Shock Resistance Functional: 20G Min.
Shock Resistance Destructive: 100G Min.
Ambient Temperature: -40C-+85C(no condensation)

-85: Connected to the ground chassis. Serves as the common ground connection to activate and magnetize the internal coil.

-86: Connected to a positive input 24V DC input. This is where a switch connected to 24V DC input will be connected to on the relay. When power is sent to the relay through pin 86, the circuit is completed with pin 85 connected to a common ground, which activates and magnetizes the internal coil.

-87a: Normally closed contact, also known as NC. In the case which the internal coil is not activated or not magnetized, pin 87a is closed and connected to pin 30, which pin 30 can be connected to either a 24V DC positive input or to the ground chassis.

-87: Normally open contact, also known as NO. The connection between pin 87 and pin 30 is only made when the internal coil is activated or magnetized, which pin 30 can be connected to either a 24V DC positive input or to the ground chassis.

-30: Common contact which can be connected to a 24V DC power input or to the ground chassis depending on the desired application. Pin 30 is always connected with pin 87a until the coil is magnetized, which pin 30 then becomes connected with pin 87.

Additional information

Weight 1.38 lbs

Reviews

There are no reviews yet.

Be the first to review “Relay Harness Spdt 5-PIN Set w/Socket Holder Interlocking Block 12 Gauge pigtails Wire Harness Connector”

Your email address will not be published. Required fields are marked *